View THS3014-TK_8090453.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

handheld oscilloscopes ths3000 series datasheet with 4 isolated channels and up to 7 hours of battery life, the lightweight ths3000 handheld oscilloscope series enables you to safely make floating or differential measurements on your bench or in the field. now you can tackle tough environments with the performance you expect from tektronix - safely and affordably. key performance specifications 100 mhz or 200 mhz bandwidth models maximum sample rates up to 5 gs/s and 200 ps resolution 4 fully isolated and floating channels 600 v rms cat iii, 1000 v rms cat ii rated inputs (bnc to earth ground) key features 21 automatic measurements waveform math and fft spectral analysis volts, time, frequency, watts cursor measurements measurement data logging with trendplot ? waveform pass/fail limit testing automatic 100 display screens recorder 6 in. (153 mm) bright color display usb device and host support 7 hours of continuous battery operation applications embedded analog and digital design power devices, power electronics, and power supply design automotive and avionics design and maintenance industrial equipment design and installation field test and service accurately measure your signals with up to 200 mhz bandwidth, 4 channels, and 5 gs/s maximum sample rate, no other oscilloscope offers as much bandwidth and sample rate in a portable handheld form factor. the ths3000 handheld oscilloscope series has 10,000 points record length per channel, enabling you to capture more signal information at higher sample rates to clearly see signal details. for applications where it is important to measure slow-changing signals over long time periods, the ths3000 series offers roll mode that extends the record length to 30,000 points of signal information.
four isolated input channels easily handle any type of mixed signal inputs safely make floating and differential measurements isolated-channel technology is specified to 1000 v rms maximum float voltage making accurate and safe measurements on power electronics, power semiconductors, and other electronics applications can be challenging when the signal reference is floating and not referenced to earth ground. when your signal ranges from low voltage to high voltage (kv) or you must use probing techniques that can potentially create ground loops, the problem is compounded. to enable floating measurements, the ths3000 series is architecturally different than most other oscilloscopes. all input channels are fully isolated from the main chassis and from each other. additionally the power adapter and usb interface are fully isolated to ensure safe measurements and eliminate the risk of unintentional grounding or accidental short circuits. when configured with the proper probes you can be assured you'll be able to make quick, safe, and accurate measurements. input signal and float voltage maximum safety ratings selecting the right probe scope/probe (attenuation) maximum safety rating ths3000 viewable signal reference float safety rating input signal safety rating on-screen p- p voltage on-screen rms voltage ths3000 (1x input) 600 v rms cat iii 300 v rms cat iii 800 v p-p 282 v rms 1000 v rms cat ii thp0301 (10x) 300 v rms cat iii 300 v rms cat iii 849 v p-p 300 v rms pp5122 (100x) 600 v rms cat ii 1000 v rms cat iii 2828 v p-p 1000 v rms p5122 (100x) 600 v rms cat ii 1000 v rms cat iii 2828 v p-p 1000 v rms fast analysis of your device the ths3000 handheld oscilloscope series is packed with analysis tools to help you validate your device's operation and identify issues quickly. with waveform math, you can add, subtract, or multiply any of your signals to investigate instantaneous power or look at gain. vertical and horizontal cursors allow you to look at a specific point on your waveform for accurate measurements of voltage, current, time, or frequency. with 21 automated measurements, you can make common measurements quickly and accurately. the built-in fast fourier transform (fft) function allows you to see the frequency spectrum of your signal, revealing signal interference, crosstalk, or switching noise. datasheet 2 www.tektronix.com
find intermittent faults with trendplot ? analyze measurements and recordings visually or using measurement cursors intermittent faults can be caused by timing errors, temperature changes, environmental influences, or simply broken wiring or connectors. the trendplot ? function helps you find those faults by plotting minimum and maximum measurement values over time. you can select up to 4 measurements and plot any combination of voltages, amps, frequency, time, and phase for any or all four inputs, all with time capture information. automatic capture and data logging of 100 display screens playback of captured data is quick and easy with the ths3000 series oscilloscopes capturing random or changing signals can often be difficult. the ths3000 series greatly simplifies any type of waveform data logging by continuously capturing 100 display screens. each screen capture can include multiple channels and math waveforms, each with its own time stamp. data capture can also be tailored to specific events by selection of qualified trigger conditions. playback is quick and easy with the automatic replay of all captured screens or only the screens you select. waveform limit testing user-defined limit testing can easily identify random waveform anomalies the ths3000 series can automatically monitor your signals and output pass or fail results by judging whether the input waveform is within predefined boundaries. user selections can include testing one or all input channels and automatic recording of pass or fail data. data can easily be reviewed using the replay mode or stored externally to a usb memory device. complete solution for power measurements easily calculate the instantaneous power by multiplying voltage and current waveforms for performing power measurement on motor drives, power converters/ inverters, and power semiconductor devices the ths3000 series is equipped to handle most common measurements. for basic debugging, the isolated input channels can be used with a variety of voltage and current probes. each input channel can be configured to match the probe type and attenuation ensuring correct measurements and cursor readings. four channels allow for easy measurements of three-phase power or simultaneous capture of digital control and power signals. handheld oscilloscopes C ths3000 series www.tektronix.com 3
measurements on power conversion electronics usually require probes with higher voltage ratings. tektronix offers a passive probe with insulation systems specifically designed for making floating measurements. the standard thp0301-x can measure up to 849 v p-p (300 v rms ). optional p5122 probes, when coupled with the ths3000 series, are suitable for making measurements on 1000 v rms devices in category ii environments, with a maximum float voltage of up to 600 v rms relative to earth ground. designed to make your work easier intuitive operation the ths3000 handheld oscilloscope series has a front-panel layout and an intuitive user interface which makes the instrument easy to use, reducing learning time and increasing efficiency. for initial setup or for situations where you're constantly changing connection points, the ths3000 series has a single-button autoset and autorange feature which can automatically set up the trigger system and adjust vertical and/or horizontal oscilloscope settings. easy to use the bright color display makes it easy for you to see the signals you're measuring. each waveform is color coded and designed to correspond to the colors on the input probe connectors, the front-panel channel selector buttons, and the individual probes which are colored at both ends. by matching the colors during setup you'll be assured you can easily identify your waveforms. for setup assistance user messages are available in 11 user-selectable languages including english, french, german, spanish, portuguese, italian, japanese, simplified and traditional chinese, korean, and russian. flexible data transfer tektronix openchoice ? desktop software extends the capabilities of your instrument the standard usb ports facilitate data storage, data transfer, and instrument control the ths3000 series oscilloscopes come with both a usb host and usb mini port located on the side panel enabling you to quickly and easily save instrument settings, screenshots, and waveform data onto a flash device or transfer the data directly to a pc. the ths3000 series is shipped with the tektronix openchoice ? desktop software, allowing you to integrate your new ths3000 series oscilloscope into existing measurement systems and take advantage of extended functionalities in data acquisition, measurement analysis, and documentation. versatility and portability for wherever your job takes you the optional travel kit (tk) version includes a hard-sided carry case for your instrument, accessories, and storage space for a laptop pc. datasheet 4 www.tektronix.com
with a battery life of 7 hours and a weight of only 4.8 lb. (2.2 kg) the ths3000 handheld oscilloscope series offers ultimate portability. measurements taken in the lab can now be conveniently correlated with those taken in the field - all on the same instrument. rated ip41, the ths3000 series features the ruggedness needed to go beyond the lab and into industrial and field environments. the optional travel kit comes with a hard-sided carrying case and useful accessories allowing you to take the ths3000 series on the road securely and conveniently. from the lab to the field, the ths3000 handheld oscilloscope series offers you the versatility of using a single, high-performance instrument suitable for a wide range of working environments. performance you can count on in addition to industry-leading service and support, every ths3000 series oscilloscope comes backed with a three-year standard warranty, and ships with a certificate of traceable calibration standard. handheld oscilloscopes C ths3000 series www.tektronix.com 5
specifications specifications apply to all models unless noted otherwise. model overview ths3014 ths3024 isolated input channels 4 4 analog bandwidth (-3 db) 100 mhz 200 mhz rise time 3.5 ns 1.7 ns hardware bandwidth limits 20khz, 20 mhz, or full float voltage 1000 v rms cat ii / 600 v rms cat iii from bnc shell to earth ground maximum sample rate 2.5 gs/s (1.25 gs/s 4-ch) 5 gs/s (1.25 gs/s 4-ch) maximum record length (all channels) 10,000 points (30,000 points in roll mode (4 ms to 2 min / div)) vertical system input coupling ac, dc input impedance 1 m 1%, 14 pf 2 pf input sensitivity range 2 mv/div to 100 v/div vertical resolution 8 bits dc gain accuracy 2.1% of reading +0.04 range/div for 5 mv/div to 100 v/div max bnc input voltage (1 m) 300 v rms cat iii from bnc signal to bnc shell max probe voltage (with standard thp0301-x probe) 300 v rms cat iii from 10:1 probe tip signal to bnc and reference lead trace positioning 4 divisions horizontal system time base range (s/div) ths3014 2 ns to 4 s ths3024 1 ns to 4 s delay time range 1 full screen (12 divisions) of pre-trigger or up to 100 screens (1,200 divisions) of post-trigger timing accuracy 100 ppm + 0.04 div zoom horizontally expand or compress a live or stopped waveform trigger system input source channel 1, 2, 3, or 4. all input references isolated from each other and earth ground main trigger modes auto-level, auto, normal, and single trigger coupling dc, hf reject, noise reject (reduces sensitivity) trigger sensitivity, internal dc coupled 0.5 divisions from dc to 5 mhz at >5 mv/div ths3024 1 divisions >5 mhz to 200 mhz (ths3024) ths3014 1 divisions >5 mhz to 100 mhz datasheet 6 www.tektronix.com
trigger level range any channel 4.0 divisions trigger modes edge positive, negative, or dual slope on any input channel. coupling includes dc, hf reject, and noise reject pulse width trigger on channel 1, width of positive or negative pulses (glitches) that are >, <, =, or a specified period of time (resolution of 0.01 div with minimum time of 50 ns) event trigger on n-th occurrence of trigger (n selectable from 2 to 99) video trigger on channel 1, line number, all lines, odd, even, or all fields on ntsc, pal, pal plus, and secam signals non-interlaced trigger on channel 1, high-res non-interlaced video with line frequencies from 14 khz to 65 khz acquisition modes sample (default) acquire sampled values glitch detect captures high frequency or glitches as narrow as 8 ns from 5 s to 120 s / div averaging selectable from 2, 4, 8, or 64 waveforms roll scrolls waveforms right to left across the screen at sweep speeds slower than or equal to 4 ms/div data recorder automatic data logging of 100 triggered records (screens) with date and time stamp. store internally or to a usb device waveform compare visually compare against user-definable reference waveforms or perform automatic pass or fail testing of 1 to 4 channels with data logging of test results automatic setup autoset single-button, automatic setup of all channels for vertical, horizontal, and trigger systems autorange continuous auto-setup of vertical, horizontal, and trigger systems that track signal changes waveform measurements cursors time, freq (1/t), volts, watts, rise/fall time from any input channel or math waveform automatic measurements 21. up to 4 can be displayed on-screen at any one time. measurements include: v dc, v ac rms , v ac+dc, v peak max, v peak min, peak to peak, a dc, a ac, a ac+dc, frequency, rise time (using cursors), fall time (using cursors), phase (between any 2 inputs), positive pulse width, negative pulse width, positive duty cycle, negative duty cycle, dbv, dbm into 50 and 600 trendplot ? records and graphically displays any 4 automatic scope measurements. store internally or to usb flash drive for recall and analysis waveform math arithmetic add, subtract, and multiply waveforms fft spectral magnitude. set fft vertical scale to linear or logarithmic, and fft window to automatic, hamming, hanning, or none handheld oscilloscopes C ths3000 series www.tektronix.com 7
display system display type 6 in. (153 mm) liquid-crystal color display display resolution 320 horizontal 240 vertical pixels waveform style vectors (dot-join), dots, envelope, variable persistence, infinite persistence display format yt and xy storage memory reference 4 user-definable reference traces waveform stores 30 internal scope records (4 traces each) with screen image and corresponding setup recording store 10 internal recordings that can be a 100-screen replay sequence, a roll-mode recording, or a trendplot ? measurement recording screen image store up to 9 internally or 256 bmp images to an external usb storage drive real-time clock time and date stamp of all stored data input/output ports usb host port supports usb mass storage devices usb device port mini-usb-b connector allows for communication/control of oscilloscope probe compensator output side-panel output C amplitude 1.225 v p-p frequency 500 hz kensignton-style lock side-panel security slot connects to standard kensington-style lock software openchoice ? desktop enables fast and easy communication between a windows pc and the ths3000 series. transfer and save settings, waveforms, and screen images power source battery 7 hour, 10.8 v rechargeable li-ion battery battery charging time 5 hours line power ac power adapter/charger power source voltage 100 v to 240 v ac 10% power source frequency 50 hz to 60 hz datasheet 8 www.tektronix.com
physical characteristics dimension height 265 mm (10.5 in.) width 190 mm (7.5 in.) depth 70 mm (2.8 in.) weight net 2.2 kg (4.8 lb.) shipping (base model) 4.7 kg (10.4 lb.) shipping (tk model) 7.8 kg (17.1 lb.) environmental enclosure ip 41 according to iec60529s temperature operating 0 c to +40 c (with battery) 0 c to +50 c (without battery) nonoperating C20 c to +60 c humidity operating 0 c to 10 c, noncondensing 10 c to 30 c, up to 95% relative humidity 30 c to 40 c, up to 75% relative humidity 40 c to 50 c, up to 45% relative humidity nonoperating C20 c to 60 c, relative humidity, noncondensing altitude operating up to 3,000 m (9,843 ft.) nonoperating up to 12,000 m (39,370 ft.) vibration/shock operating vibration (sinusoidal): 3 g max, according to mil-prf-28800f, class 2 shock: 30 g max, according to mil-prf-28800f, class 2 nonoperating vibration (random): 0.03 g2/hz, according to mil-prf-28800f, class 2 regulatory electromagnetic compatibility en 61326-1:2006, en 61326-2-1:2006 for emission and immunity safety ul61010-1:2004; can/csa c22.2 no. 61010.1-04; en61010-1:2001, pollution degree 2; ansi/isa-82.02.01 handheld oscilloscopes C ths3000 series www.tektronix.com 9
ordering information ths3000 models ths3014 100 mhz, 2.5 gs/s, 4-channel handheld oscilloscope THS3014-TK 100 mhz, 2.5 gs/s, 4-channel handheld oscilloscope with travel kit ths3024 200 mhz, 5 gs/s, 4-channel handheld oscilloscope ths3024-tk 200 mhz, 5 gs/s, 4-channel handheld oscilloscope with travel kit all models include: thp0301-y/b/m/g 300 mhz 10x passive probes, lithium-ion battery with 7-hour battery life, carrying handle, hanging strap, usb-a to mini usb-b cable for pc communication, installation/safety manual, documentation cd 1 , ac power adapter with power cord, achhs soft-sided carry case (standard with non-tk, optional for - tk models), openchoice ? desktop pc communication software, calibration certificate documenting traceability to national metrology institute(s) and iso9001 quality system registration, three-year warranty. tk models also include: hard-sided travel case (instead of soft case), soft-sided probe case, 2 probe replacement accessory kits. please specify power plug when ordering warranty three-year warranty covering all parts and labor, excluding probes. instrument options international power plugs opt. a0 north america power plug (115 v, 60 hz) opt. a1 universal euro power plug (220 v, 50 hz) opt. a2 united kingdom power plug (240 v, 50 hz) opt. a3 australia power plug (240 v, 50 hz) opt. a4 north america power plug (240 v, 50 hz) opt. a5 switzerland power plug (220 v, 50 hz) opt. a6 japan power plug (100 v, 110/120 v, 60 hz) opt. a10 china power plug (50 hz) opt. a11 india power plug (50 hz) service options opt. silv400 standard warranty extended to 5 years 1 documentation cd available in english, german, korean, japanese, simplified chinese, traditional chinese, and russian (063-4379-xx). datasheet 10 www.tektronix.com
recommended accessories accessories accessory description thsbat additional spare battery thschg battery charger (does not include ac power adapter) achhs instrument soft case hchhs instrument hard case (standard with tk models) 376-0255-xx versatile hanging hook 020-3085-xx probe replacement accessory kit 119-7900-xx ac power adapter probes probe description thp0301-y (yellow) 300 v, dc to 300 mhz, 10x high-voltage probe 2 thp0301-b (blue) 300 v, dc to 300 mhz, 10x high-voltage probe 2 thp0301-m (magenta) 300 v, dc to 300 mhz, 10x high-voltage probe 2 thp0301-g (green) 300 v, dc to 300 mhz, 10x high-voltage probe 2 a621 2000 a, 5 khz to 50 khz ac current probe/bnc a622 100 a, 100 khz ac/dc current probe/bnc p5122 200 mhz passive 100x high-voltage probe p5150 500 mhz passive 50x high-voltage probe 3 ct2 2.5 a, 200 mhz ac current probe tcp303/tcpa300 150 a, 15 mhz ac/dc current probe/amplifier tcp305/tcpa300 50 a, 50 mhz ac/dc current probe/amplifier tcp312/tcpa300 30 a, 100 mhz, ac/dc current probe/amplifier tcp404xl/tcpa400 500 a, 2 mhz ac/dc current probe/amplifier tektronix is registered to iso 9001 and iso 14001 by sri quality system registrar. 2 one probe comes standard with the instrument. 3 the p5150 is fully compatible with ths oscilloscopes, but 50x vertical scaling is not offered. handheld oscilloscopes C ths3000 series www.tektronix.com 11
datasheet asean / australasia (65) 6356 3900 austria 00800 2255 4835* balkans, israel, south africa and other ise countries +41 52 675 3777 belgium 00800 2255 4835* brazil +55 (11) 3759 7627 canada 1 800 833 9200 central east europe and the baltics +41 52 675 3777 central europe & greece +41 52 675 3777 denmark +45 80 88 1401 finland +41 52 675 3777 france 00800 2255 4835* germany 00800 2255 4835* hong kong 400 820 5835 india 000 800 650 1835 italy 00800 2255 4835* japan 81 (3) 6714 3010 luxembourg +41 52 675 3777 mexico, central/south america & caribbean 52 (55) 56 04 50 90 middle east, asia, and north africa +41 52 675 3777 the netherlands 00800 2255 4835* norway 800 16098 people's republic of china 400 820 5835 poland +41 52 675 3777 portugal 80 08 12370 republic of korea 001 800 8255 2835 russia & cis +7 (495) 6647564 south africa +41 52 675 3777 spain 00800 2255 4835* sweden 00800 2255 4835* switzerland 00800 2255 4835* taiwan 886 (2) 2722 9622 united kingdom & ireland 00800 2255 4835* usa 1 800 833 9200 * european toll-free number. if not accessible, call: +41 52 675 3777 updated 10 april 2013 for further information. tektronix maintains a comprehensive, constantly expanding collection of application notes, technical briefs and other resources to help engineers working on the cutting edge of technology. please visit www.tektronix.com . copyright ? tektronix, inc. all rights reserved. tektronix products are covered by u.s. and foreign patents, issued and pending. information in this publication supersedes that in all previously published material. specification and price change privileges reserved. tektronix and tek are registered trademarks of tektronix, inc. all other trade names referenced are the service marks, trademarks, or registered trademarks of their respective companies. 19 apr 2013 3gw-27121-5 www.tektronix.com

▲Up To Search▲

Price & Availability of THS3014-TK

	To Download THS3014-TK Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .